MAKE: Makers Faire – Newsletter

Make:
 
 
 
SlowMo Bullet
 
 
Tuesday November 29, 2016
 
 
Teaching How to Safely Photograph Bullets in Flight
 
If you’ve ever wondered how to get those incredible slow motion shots of bullets shooting through everyday objects, here’s how to do it safely, courtesy of the Rochester Institute of Technology.
 
 
 
 
READ MORE
 
 
 
 
 
Sponsored by:
 
 
Bose Build - Discover how your speaker works | Speaker Cube
 
 
 
 
 
5 Minute Foam Factory
 

Five-Minute Foam Factory
 
Make this easy hot-wire foam cutter and reuse leftover EPS foam to create treasures from trash. Once you’ve mastered the basic techniques, you can create a double-cut, 3D teddy bear shape, spin a compound-curve cone, and cut a stack of foam sheets to make a blizzard of snowflakes.

 
 
 
Read More
 
 
 
 
 
 
Electric Unicycle
 

3D Print a High-Power Electric Unicycle
 
Cruise 25 miles at 20mph on a sweet, one-wheeled ride you built yourself! The housing is 3D-printed in sections that are then stacked together to hold the batteries and the handle section holds the microcontroller.

 
 
 
Read More
 
 
 
 
 
Sponsored Content:
 
 
 
 
 

Kids Discover the Science of Sound with BOSEbuild
 
The BOSEbuild Speaker Cube is the perfect gift for aspiring young makers. Kids learn the science of sound as they explore the world of magnets, electromagnets and motion. At the end of their app-driven journey, they will have their very own Bluetooth speaker with Bose-quality sound!

 
 
 
Learn More
 
 
 
 
 
 
Paper Ornaments
 

Paper Christmas Tree Ornaments
 
Craft these cute, easy-to-make ornaments in no time flat! It’s a great family project for a snowy day.

 
 
 
Read More
 
 
 
 
 
 
Wallet
 

Carry Less Stuff with a Minimalist Leather Wallet and Key Holder
 
Recreate this time-tested, simple design that carries only the bare essentials to leave your house: keys, ID, and currency. No keychains, no forgotten membership cards, no overstuffed coin pocket full of pennies.

 
 
 
Read More
 
 
 
 
 
 
Dice Tower
 

Building Your Own Dice Tower
 
If you’ve ever played a board, tabletop, or role-playing game with lots of gaming materials on the table, you know how much havoc an errant dice roll can cause. The answer to this destructive threat is the dice tower, a game accessory that allows your rolls to land within a safe, fenced-in area.

 
 
 
Read More
 
 
 
 
 
More from Make:
 
There are few better ways to beat the cold than by hopping in the hot tub. For Jesse and Alyssa, that meant building a system for their off-the-grid homestead, but you can easily adapt it to your backyard.
 
For those looking for high quality prints and reliability, the Ultimaker 2 Extended+ is a hard machine to beat. Check out our review in the newly updated 3D Printer Buyer’s Guide 2017.
 
Samsung’s Artik 10 IoT development board has so many features that no developer is likely to need all of them. But the combination of options means that any problem can be solved in a variety of ways. Read our mini review for more.
 
 
 
 
 
Make: Gift Guide — Technology
 
 
 
Every week, we’ll be featuring some of our favorites from the Make: Gift Guide. This week, we’re sharing some top picks from our technology category.
 
Featured Product: NVIDIA Jetson TX1 Development Kit
 
 
 
 

 
Looking for a developer kit that has some serious AI chops? The Jetson TX1 has 1 Teraflop of performance, an NVIDIA Maxwell GPU with 256 cores, 4GB memory and 16GB eMMC. This super powerful board is perfect for complex projects, especially work in computer vision and autonomous robotics.

 
 
 
A few more favorites:
 
 
 
 
Heathkit Digital Clock Kit
 
 
Getting Started with Wearables
 
Makey Makey Go
 
 
Butane Soldering Iron
 
 
 
 
 
 

Upcoming Maker Faires
 
»  DTLA Mini Maker Faire (Los Angeles, CA): Dec 3
»  Chengdu Mini Maker Faire (Sichuan, China): Dec 3–4
»  Ogaki Mini Maker Faire (Ogaki City, Japan): Dec 3–4
»  Bogotá Mini Maker Faire (Columbia): Dec 10–11
»  Strasbourg Mini Maker Faire (France): Dec 16–18
 
Find a Maker Faire near you on the Maker Faire map.

 
 
FIND A FAIRE
 
 
 
 
 
Maker Media, Inc | 1160 Battery St. East, Ste 125 | San Francisco, CA 94111
 
Having trouble viewing this email? View it online.

via Blogger http://ift.tt/2gGmfvi

Advertisements

Autodesk – instructables – newsletter

 
Knit cozy scarves, craft beautiful leather pieces, carve wooden spoons and more!
 
 
Get holiday-ready with Instructables Classes.
 
Learn new skills with our beginner classes and impress your loved ones with the best handmade gifts!
 
 
 
 
 
  Check Them Out! »  
 
 
 
 
 
Featured Classes
 
 
Knit cozy scarves, craft beautiful leather pieces, carve wooden spoons and more ways to make one-of-a-kind gifts!
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  See All Classes! »  
 
 
 
 
 
Have questions? Check out our classes FAQ!
 

via Blogger http://ift.tt/2fLPvMQ

AUTODESK – instructables – newsletter

Instructables
Today’s Staff Picks
Banner

 3D Periodic Table by makendo in Science

How to Spread Kindness

 How to Spread Kindness by asergeeva

Cake Decorating Class

 Cake Decorating Class with wold630

Make Coiled Wire

 Make Coiled Wire by mikeasaurus

How to Build a Tesla Coil

 How to Build a Tesla Coil by tanner_tech

Aquaponics Vertical Garden

 Aquaponics Vertical Garden by LinkG4

Portable Mini Refrigerator

 Portable Mini Refrigerator by deba168

Indoor Gardening Contest 2016
Naan Bread

 Naan Bread by VespressoCooking

Mini Solar Power Bank Speaker

 Mini Solar Power Bank Speaker by Baclair

Arduino Controlled Beer Dispenser

 Arduino Controlled Beer Dispenser by sabladask

CNC Plotter Using DVD Drives

 CNC Plotter Using DVD Drives by CNC World

Automated Whiskey Distillery

 Automated Whiskey Distillery by Tecwyn Twmffat

RFID Door Unlock

 RFID Door Unlock by keebie81

4 Ingredient Rolo Caramel Fudge

 4 Ingredient Rolo Caramel Fudge by KitchenMason

TPA3118 Amplifier and Speaker

 TPA3118 Amplifier and Speaker by FunkyPineapple

Two-Tier Cherry Side Table

 Two-Tier Cherry Side Table by smiller82

Magnetic Soap Holder

 Magnetic Soap Holder by DougB89

ad
CONTESTS
Arduino Contest 2016
Brave the Elements 2016
Vegan Food Challenge
Homemade Gifts Contest 2016
Tables and Desks Contest 2016
Make it Glow Contest 2016

spacer All Contests » spacer

Want More Inspiration?

 Customize Feed »

 See All Featured »

 Browse Contests »

via Blogger http://ift.tt/2g2xZVb

COMPETE2020 – Indústria 4.0 a Quarta Revolução Industrial – Newsletter

Newsletter N.º 79 | Indústria 4.0 a Quarta Revolução Industrial
2016-11-29
Compete2020
Indústria 4.0 – O futuro que se constrói nos projetos apoiados pelo COMPETE 2020
IMP_4.0: Integrated Management Platform

Desenvolvimento de uma plataforma inovadora de integração e interoperabilidade que capacite as organizações a adotarem práticas presentes no conceito de Fábricas Inteligentes
RoboCer3D – Fabrico rápido de produtos em porcelana por “Robocasting 3D”

O projeto RoboCer3D tem como objetivo o desenvolvimento de uma tecnologia de fabrico aditivo para produtos em porcelana, nomeadamente a tecnologia de “Robocasting 3D” (R3D). Uma tecnologia que permite o fabrico de peças com geometrias e funcionalidades que não são possíveis obter por tecnologias convencionais.
ADIRA INDUSTRY 4.0

Desenvolvimento de soluções hardware e software implementando serviços de dados e comunicação entre máquinas no âmbito da Indústria 4.0
Indústria 4.0 a Quarta Revolução industrial

A Indústria 4.0 ou a Quarta Revolução Industrial é impulsionada pelas tecnologias inovadoras que causam efeitos profundos, quer nos sistemas de produção quer nos modelos de negócio, fazendo com que as empresas tenham a capacidade de criar redes inteligentes ao longo de toda a cadeia de valor.
AIP dinamiza Sistemas de Controlo e Informação para aumentar Competitividade nas PME

“People and Performance” apresentado no Porto, Aveiro e Marinha Grande, para que as PME do Porto, Aveiro e Marinha Grande, a decorrer nos dias 29 e 30 de novembro, em encontros empresariais com entrada livre promovidos naquelas 3 cidades, marcados para o Hotel Vila Galé Porto, Mélia Hotel Ria Hotel e Hotel Cristal Marinha.
Conferência ‘O impacto do Portugal2020 nas Universidades’

A Conferência realizar-se-á no dia 30 de novembro pelas 9h, no Anfiteatro Nobre (B032) da FEUP Faculdade de Engenharia da Universidade do Porto e, contará com a presença de Alexandra Vilela, Vogal do COMPETE 2020 com a temática “A capacitação das Universidades via Portugal 2020”.
Ficha Técnica
Coordenação Editorial : Núcleo de Reputação Corporativa & Comunicação
COMPETE 2020

http://ift.tt/1fKwxpt
info@poci-compete2020.pt

source: http://ift.tt/2g2ig8D

via Blogger http://ift.tt/2fyQ8Oo

COMPETE2020 – Indústria 4.0 a Quarta Revolução Industrial – Newsletter

Newsletter N.º 79 | Indústria 4.0 a Quarta Revolução Industrial
2016-11-29
Compete2020
Indústria 4.0 – O futuro que se constrói nos projetos apoiados pelo COMPETE 2020
IMP_4.0: Integrated Management Platform

Desenvolvimento de uma plataforma inovadora de integração e interoperabilidade que capacite as organizações a adotarem práticas presentes no conceito de Fábricas Inteligentes
RoboCer3D – Fabrico rápido de produtos em porcelana por “Robocasting 3D”

O projeto RoboCer3D tem como objetivo o desenvolvimento de uma tecnologia de fabrico aditivo para produtos em porcelana, nomeadamente a tecnologia de “Robocasting 3D” (R3D). Uma tecnologia que permite o fabrico de peças com geometrias e funcionalidades que não são possíveis obter por tecnologias convencionais.
ADIRA INDUSTRY 4.0

Desenvolvimento de soluções hardware e software implementando serviços de dados e comunicação entre máquinas no âmbito da Indústria 4.0
Indústria 4.0 a Quarta Revolução industrial

A Indústria 4.0 ou a Quarta Revolução Industrial é impulsionada pelas tecnologias inovadoras que causam efeitos profundos, quer nos sistemas de produção quer nos modelos de negócio, fazendo com que as empresas tenham a capacidade de criar redes inteligentes ao longo de toda a cadeia de valor.
AIP dinamiza Sistemas de Controlo e Informação para aumentar Competitividade nas PME

“People and Performance” apresentado no Porto, Aveiro e Marinha Grande, para que as PME do Porto, Aveiro e Marinha Grande, a decorrer nos dias 29 e 30 de novembro, em encontros empresariais com entrada livre promovidos naquelas 3 cidades, marcados para o Hotel Vila Galé Porto, Mélia Hotel Ria Hotel e Hotel Cristal Marinha.
Conferência ‘O impacto do Portugal2020 nas Universidades’

A Conferência realizar-se-á no dia 30 de novembro pelas 9h, no Anfiteatro Nobre (B032) da FEUP Faculdade de Engenharia da Universidade do Porto e, contará com a presença de Alexandra Vilela, Vogal do COMPETE 2020 com a temática “A capacitação das Universidades via Portugal 2020”.
Ficha Técnica
Coordenação Editorial : Núcleo de Reputação Corporativa & Comunicação
COMPETE 2020

http://ift.tt/1fKwxpt
info@poci-compete2020.pt

source: http://ift.tt/2g2ig8D

via Blogger http://ift.tt/2fyQ8Oo

prémio Brisa Mobilidade – Acredita Portugal – Concurso Brisa – apply until 15 JAN 2017

O prémio Brisa Mobilidade destina-se a todas os projetos relacionados com serviços e/ou soluções tecnológicas que contribuam para melhorar a eficiência e a integração dos sistemas de mobilidade, ou para criar novas ofertas de mobilidade ou, ainda, que contribuam para um upgrade da conectividade dos sistemas de transportes, urbanos e não-urbanos, de passageiros e comerciais, nas perspetivas digital e comportamental.

Todos os participantes no concurso Acredita Portugal cujo projeto se enquadre nestas áreas são automáticamente candidatos ao prémio Brisa Mobilidade.

Tem uma ideia na área da mobilidade? Candidate-se já!

http://ift.tt/2gdUefB

Source: http://ift.tt/2fMnKqk

via Blogger http://ift.tt/2gsp9kt

COLISION – conferences Newsletter

Our biggest ever Collision 2 for 1 sale is now live. Your unique discount code is:
Tickets available for:

Our biggest ever Collision 2 for 1 sale is now live. Your unique discount code is: CNTF64227w

You can use your code to 
get your tickets here. Make sure you apply your discount code to get your second ticket for free.

Below is yesterday’s email with additional details.

Any questions, just hit reply.

Jane

Collision Team

P.S. If you’d prefer to receive no further emails regarding our 2 for 1 sale please click here.

On 27 November, Collision wrote:
On Cyber Monday, we’re holding our biggest ever Collision ticket sale. You can bring a friend to Collision for free by getting two general attendee tickets for the price of one.
Tickets on sale in:

On Cyber Monday, we’re holding our biggest ever Collision sale. You can bring a friend to Collision for free by getting two general attendee tickets for the price of one.

Check out how to get your tickets below:
 

  1. 2 for 1 tickets will be on sale all day on Monday, November 28
     
  2. Your unique discount code is: CNTF64227w
     
  3. Head to this link to get your tickets. You’ll see a package containing two general attendee tickets at $1,360 – apply your discount code to reduce the price by 50%
     
  4. Both general attendee tickets give access to the Collision exhibition floor, roundtable sessions, talks across all our nine stages and our legendary networking events
     
  5. Our Cyber Monday sale takes place for 24 hours. Your code will become inactive after midnight PST on Monday
Any questions? Just hit reply to contact our team and we’ll be happy to help.

See you in New Orleans,

Jane

Collision Team

P.S. Want to know more about Collision? Check out what to expect on our nine stages below.

PandaConf – learn from marketing giants, global CMOs, agencies and adtech startups
SaaS Monster – meet experts, innovators and industry leaders in the SaaS sphere
Startup University – how to build and think like a successful startup
Binate.io – hear from data and analytics companies, and world-leading data scientists
Talk Robot – all about artificial intelligence, robotics, and hardware
FullSTK –  talks by world-leading developers, engineers and computing experts
Music Notes – labels, artists, and brands discuss technology’s impact on the music industry
AutoTech – the future of autonomous vehicles and IoT
creatiff –  be inspired by designers and creatives from across the globe

via Blogger http://ift.tt/2gxTBMP

AUTODESK – instructables – Newsletter

Instructables
Today’s Staff Picks
Banner

 Impossible Nail in Wooden Block by seamster in Woodworking

'90s Payphone Boombox

 ’90s Payphone Boombox by Fuzzy‑Wobble

Glue Class

 Glue Class with audreyobscura

Glowing Circuit Board Lamp

 Glowing Circuit Board Lamp by Natural Nerd

Recycle Your Dead Laptop Battery

 Recycle Your Dead Laptop Battery by Steve Willson Kujur

How to Start a Beehive

 How to Start a Beehive by JenniferBerry

Glowing River Desktop

 Glowing River Desktop by NathanSellers

First Time Authors Contest 2016
Torus Box

 Torus Box by Simon Beggs Wood Turning

Inline Digital Hydrometer

 Inline Digital Hydrometer by Tecwyn Twmffat

Rustic Bluetooth Speaker Bar

 Rustic Bluetooth Speaker Bar by GemaRastem

Overlapping Tandem Barn Doors

 Overlapping Tandem Barn Doors by KevinN109

Easy as Pie GPS Datalogger

 Easy as Pie GPS Datalogger by tinkrmind

Wooden Passive Amplifier for iPhone

 Wooden Passive Amplifier for iPhone by manuelmasc

Walnut & Maple Box with Epoxy Inlay

 Walnut & Maple Box with Epoxy Inlay by AverageJoesJoinery

Retro-Mod Bluetooth Speaker

 Retro-Mod Bluetooth Speaker by diggoryrush

Hot Glue & Aluminum Art

 Hot Glue & Aluminum Art by 2Witches

Wooden Ford 1903 Logo

 Wooden Ford 1903 Logo by Thomas Workshop

ad
CONTESTS
Tables and Desks Contest 2016
Baking Contest 2016
CNC Contest 2016
Epilog Contest 8
Vegan Food Challenge
Brave the Elements 2016

spacer All Contests » spacer

Want More Inspiration?

 Customize Feed »

 See All Featured »

 Browse Contests »

Facebook Twitter Piterest Google Plus

via Blogger http://ift.tt/2gzCMP1

APPCIRCUS – Newsletter

What a great final we had!

Last week saw the team head to the Smart City Expo World Congress for the long awaited Smart City Hack 2016 Final. In front of a packed crowd our ten finalists pitched their brilliant solutions to our jury and really wowed us with their passion and solutions. Still, there was clearly one app that deserved the ‘Best SCH Solution 2016’ award, Phoenix’s Storage Together! As for really driving a sense of ‘Citizen Empowerment’, Psonríe took the prize. Click below to find out all about them…


Storage Together
Best SCH Solution 2016

Psonríe
Citizen Empowerment Award

The Appcircus Team

AC Stuttgart – The Last Appcircus of 2016!
It’s been an interesting year for all but we’ve still managed to squeeze an amazing 13 Appcircus events, as well as many other delights, into 2016. While submission for Stuttgart is closed you can still register and watch 10 developers battle it out for an MPA nomination and network like a pro. 

The Better Life App Challenge Final

Our judges are currently sifting through over sixty apps from around the world in order to pick the ten finalists who’ll be taking the stage at Antiga Fabrica Estrella Damm, Dec 13. Who’ll be sharing the $10K prize money and rewards? Why not join us and find out! There’s complimentary beers and snacks of course.

via Blogger http://ift.tt/2gnKRW1

SIBS PAY FOWARD – FINTECH Contest – apply until 31st January 2017

READY TO MOVE FORWARD SMART FINANCE AND PAYMENTS SOLUTIONS WORLDWIDE?

30 years ago SIBS started the startup way to turn into one of the World’s top Fintech innovators.

Now, it is paying forward, by creating this opportunity for startups to build together financial solutions Worldwide.

SIBS is committed to continue innovating alongside startups to provide excellence in smart finance & payment services to people anytime, anywhere.

Are you one of the most innovative Startups with a Smart Finance or Payments solution?



The Fintech Evolution is here

Join SIBS PayForward for the unique opportunity to disrupt the Smart Finance and Payments Industry alongside a Fintech heavyweight.


A 2-month program with top methodologies and experts backed by
one of the main innovators in the industry and the leading Startup Accelerator in Portugal,
Beta-i.

source:  http://ift.tt/2fM8Z4D

via Blogger http://ift.tt/2fyivdV